• Strong optical output power.
• 3 treatment modes: Normal, Ramp & Pulse.
• DIGITAL Time setting: 0~20s for LED curing light.
• Full color LCD display.
• LED cold light output can treat all dental tissue.
• Alarm for low voltage.
• Working Voltage – 100-220 VAC, 50-60 Hz.
• Working volt : 4.2-4.5 volts.
• Electric current : 0.7 amperes.
• Battery capacity: 1400mAH.
• Lumiminous intensity:> 1200MW/cm2 5 w.

• Using a light guide, center the light source over the detector window read the useful curing power in mw/c.
• Used to test the curing power of dental curing light etc.
• Measures useful curing energy up to 3500 mW/cm2.
• Light, compact design.
• Capable of measuring both LED and halogen curing lights.
• Able to measure intensity up to 3500mw/cm2.

• Wireless. The battery can be replaced.
• Three working modes: Full, Ramping, Pulse.
• Time setting: 5s 10s 15s 20s 25s 30s 35s 40s.
• Automatic memory.
• A full charge can be used for over 200 times (10 s/time).
• Constant light intensity, the solidification effect is stable even the battery power decrease.
• with wire or wireless. Even the battery runs out, it can work by connecting power supply with wire.

• Woodpecker, High Quality Manufacturer.
• Comfortable ergonomic design
• Simple one-button function.
• Constant light intensity output.
• Wireless

• CURE 2MM RESINS IN ''1'' SECOND.
• MAXIMUM INTENSITY OF 3000 mw/CM2.
• TWIN MODE- P1(HIGH INTENSITY MODE); P2(NORMAL INTENSITY)
• FREE SET OF DISPOSABLE SLEEVES.
• UNBREAKABLE PROBE WITH 360 DEGREE ROTATION.

• Maximum power supply due to the lithium-polymer battery with highest capacity. 
• Three adjustable curing times ensure efficient & reliable operation.
• For all indications due to continuous operation.
• Controlled light curing due to adjustable curing times.
• Universal program for the intuitive 1-button operation and uncomplicated handling.
• Rotatable 10-mm light probe for optimal access to all restored areas.

• Polywave LED with halogen-like broadband spectrum of 385 to 515 nm
• Suitable for fast curing of all light initiator systems.
• For all indications due to continuous cooling.
• Click & Cure for battery-free emergency operation with the power pack.
• 3 curing modes: High Power (1,200 mW/cm2) for quick polymerization, Low Power (650 mW/cm2) for polymerization near the pulp and Soft Start (650 - 1,200 mW/cm2) for polymerization with reduced shrinkage stress.
• Rotatable 10-mm light probe for optimal access to all restored areas.

• For all indications due to continuous operation.
• Simple and uncomplicated handling due to a universal programm and 1-button operation.
• Fits the hands comfortably due to an ergnomic design.
• Rotatable 10-mm light probe for optimal access to all restored areas.
• Suitable for the polymerization of light-curing dental materials in the wavelength range of 430 - 490 nm.
• These materials include restoratives, adhesives, bases, liners, fissure sealants, temporaries, as well as luting materials for brackets and indirect restorations, such as ceramic inlays.

• Polywave LED with halogen-like broadband spectrum of 385 to 515 nm.
• Suitable for all materials.
• Large treatment field due to 10-mm light probe.
• Shortened light probe, enabling access to all tooth surfaces without extreme opening of the mouth.
• Click & Cure for battery-independent emergency corded operation.

• Efficient shade-taking without having the patient leave the dental chair
  Daylight mode for initial shade determination
  Room light and ambient light modes to verify shade

• Protects the entire staff.
• Can be held by the assistant, the patient or the free hand of the operator.

Features

• Two working modes: HIGH & NORMAL

• Time Setting:Constant light intensity. Solidification effect is not affected by the consumption of remaining power.

  • HIGH 1s, 3s
  • NORM 5s, 10s, 15s, 20s

• Large capacity battery. a full charge can be used for more than 400times continuously under 10s working time mode.

WARRANTY

18 Month Warranty

• DENEXT 1 LED introduces LED Curing Light with Photometer with finest technology.
• This LED Curing Light has been designed after thorough research from conventional light cure units.

Two modes for option:With the maximum light intensity of 2300mw/cm2,Curing 2mm resin in 1s,Which makes it especially suitable for orthodontic brackets, porcelain veneers and post core adhesives.

• Turbo mode from 1 second
• Integrated spectrometerUniform and collimated beam
• Optimally collimated beam output, effectively reduce the optical loss.
• Light source design providing excellent intra-oral access.
• Constant light intensity. The solidification effect is not affected by the consumption of remaining power.
• Charging base with integrated radiometer.

• Measure up to 3000mW/cm2 for all light curing sources--LED, Plasma Arc and Halogen Lights.